idler pulley

Twist the tensioning roller clockwise and simultaneously place the belt on the idler pulley.

顺时针转动张紧滚柱，同时将皮带放在惰轮皮带轮上。

Use a suitable brass punch and a suitable hammer in order to remove bearing 5 from idler pulley assembly 2.

使用合适的黄铜冲头和合适的锤子从惰轮皮带轮组件2上拆下轴承5。

Blend Rational B é zier Fit in Reversing Production of Idler Pulley

导轮逆向生产中的混合有理Bézier曲面拟合

Loosen the accessory drive belt at the power steering pump bracket, if equipped or at the idler pulley bracket ( refer to Group 7, Cooling System for the proper procedure).

如果装备且在惰轮皮带盘托架上，放松动力转向泵托架上的附件驱动皮带。

Remove tightener arm assembly 7 and idler pulley 4 from the shaft as an assembly.

将张紧器臂组件7和引导轮皮带轮4作为一个组件从轴上拆下。